Wholesale Marketplace
Home >

Custom PM 2 / 2 Way Brass Solenoid Valve , Latching Solenoid Valve For Gas

Categories Brass Solenoid Valve
Brand Name: NBSANMINSE
Model Number: PM Latching Solenoid Valve
Certification: ISO9001
Place of Origin: NINGBO
MOQ: 1 Pc
Price: Negotiation
Payment Terms: L/C, Western Union, T/T
Supply Ability: Negotiation
Delivery Time: Negotiation
Packaging Details: Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice
Medium: Water , Air Etc
Orifice: 13 mm - 50 mm
Temperature: 0 ~ 60 ℃
Connection: Thread
Action: Latching
Body: Brass , Stainless Steel 304
Pressure: 0 . 5 ~ 16 kgf / cm ²
Port Size: 3 / 8 " ,1 / 2 " ,3 / 4 " ,1 " ,1 1 / 4 " ,1 1 / 2 " ,2 "
  • Product Details
  • Company Profile

Custom PM 2 / 2 Way Brass Solenoid Valve , Latching Solenoid Valve For Gas

Custom PM 2 / 2 Way Brass Solenoid Valve , Latching Solenoid Valve For Gas


Applicability


1 . The pipeline fluid must same as solenoid valve marked medium .

2 . Fluid temperature must be less than the marked temperature .

3 . Solenoid valve allowed the liquid viscosity , generally under 20 CST , more than 20 CST shall be indicated .

4 . Pay attention to the environmental temperature on the influence of solenoid valve .

5 . Power supply current and power consumption should be selected according to the output capacity , power supply voltage generally allow + / - 10 % , must pay attention to AC starting the VA value is higher .


Reliability


Solenoid valve is divided into normally closed and normally open . General choose normally close , power on is open and power off is shut down ; But in the open for a long time and very short close time to choose the normally open type .


Security


1 . General solenoid valve is not waterproof , when needs waterproof model , we can be customized .

2 . Nominal pressure solenoid valve of the highest calibration must be more than the highest pressure in the pipeline , otherwise life will shorten or other unexpected circumstances .

3 . Corrosive liquid should be chosen in all stainless steel type , appropriate chooses the corrosive fluid plastic king ( LF ) solenoid valve .


Economy


There are a lot of solenoid valve can be common use , but on the basis of can satisfy the above three terms , should choose the most economical products.


Characterstics


This series valve is famous for sensitive reaction and high pressure .

Usually be used to circuit control board connection , it ' s good for energy saving.

Widely used to IC card gas conmbustion meter , water saving irrigation , water meter and various automatism sanitation .

The core of the valve can be pulled and stretched to be the good shape , with good strictness , credibility , sensitive reaction and long life - spen .

Voltage : DC6V / DC12V / DC24V

Seals: NBR , VITON , EPDM

Valve body : Brass , Stainless Steel304

Pulse : Wid +h : 50 ~ 80 ms


Using Condition


Fluid Media : Water , Gas ( but not corrosive )

Fluids Temp . : ≤ 60 ℃ , Pls use at the area

which relative Temp . can not over then 85 %



FAQ


Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.


Q: What ' s your business scope ?
A: Our business scope is SMC type high quality cylinder , air source treatment , solenoid valve ,water valve,steam valve, mechnical valve ,foot valve,angle seat valve,anti-explosion valve,pluse vlave, pneumatic valve ,hydraulic ball valve,hydraulic ss ball valve,hydraulic check valve,hydraulic solenoid valve ,all type of coil,lubrication pump and parts,SS316 fitting,quick coupler , etc .

Q: What ' s your delivery date ?


A: It depends on the number of orders . Delivery date is 7 - 30 days .if small order,pls buy from our aliexpress shop, If you need emergency products , we can speed up the production of the first arrangement .


Q: what types of products you can make ?
A: We can make many kinds of stainless steel materials and brass,aluminum . Valve / solenoid valve / electric valve / pneumatic valve and air cylinder products and so on .


Q: Do your company have specialized technical personnel ?
A: Design as your requirements,and have QC for make 100% inspection


Q: Can the product be made with our logo and brand ?
A: Yes , of course , we can make . we are OEM supplier for years and professional to make . But you need give us the authorization for work.



Why choose us


1: Various style for each products and completely series pneumatic products .
2: Large stock for fast shipping .

3: Provide free products information .
4: Reliable quality assured and active after-sell service
5: One year quality guarantee



Quality Custom PM 2 / 2 Way Brass Solenoid Valve , Latching Solenoid Valve For Gas for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Ningbo Sanmin Import And Export Co.,Ltd.
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0