Wholesale Marketplace
Home >

1.0mm pitch dual row wire housing wire to board connector for ACES 88252 equivalent

Categories Wire to Board Connectors
Brand Name: HRT
Model Number: A1004H-2XNP
Certification: ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin: Dongguan, China(mainland)
MOQ: 5000 pcs
Price: USD0.001 to 1.0 per pcs
Payment Terms: TT, Western Union, PayPal, L/C
Supply Ability: 28 million pcs per month
Delivery Time: 5 to 8 working days after payment checked
Packaging Details: bag with outside paper carton
color: white
pitch: 1.00mm
material: Nylon46 UL94V-0
wire range: AWG28# to 32#
Gender: female
  • Product Details
  • Company Profile

1.0mm pitch dual row wire housing wire to board connector for ACES 88252 equivalent

1, The specification of the product including basic size information, electrical and mechanical properties.


Basic size information
Circuits20pins/30pins/40pins
Pitch1.0mm
MaterialNylon46 UL94V-o
Suitable terminalsA1004 series terminal
Wire Insulation Diameter0.80mm max.
Electrical properties
Current Rating:1A AC, DC
Voltage Rating50V AC, DC
Contact Resistance:20mΩ Max
Insulation Resistance:100mΩ min
Withstanding Voltage:500V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

The below drawing can be a good reference for you, please kindly check the testing data to choose our product right.

5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#281.6kgf (Min)
AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.50kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 40mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Insulation Resistance 10MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
Single0.200.04
2X102.500.50
2X153.750.75
2X205.001.00



3, Application fied of these product

This product are widely used in household appliance, computer, communication device. Because our product have very high quality, it is accepted by famouse manufacturer like Huawei, Skyworth, BYD etc. And the all are certificated by REACH, UL, RoHs. In order to protect the evironment, some parts are halogen free.


4, we can offer multiple, safe and fast shippment for you!

We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.


Quality 1.0mm pitch dual row wire housing wire to board connector for ACES 88252 equivalent for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Dongguan Xinpei Plastic & Metal Electronic Co. Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0