Features of Automatic Softener Valve RUNXIN F68A3 side connect
1) It adopts the seal slice, scuff resistance, corrosion proof for
opening and closing. Mechanical part is more reliable.
2) Manual function: Use hand wheel to carry on manual operation
when power off or controller unable to work normally.
3) Keyboard locked function: If the keyboard has not been operated
within one minute, it will be locked by itself to avoid incorrect
4) No water flows out while single tank type control valve
5) Have output signal connector: There are three output signal
connectors on PC board: N/O, N/C. COM which could be connected with
booster pump and solenoid valve.
6) One valve has two kinds of regeneration controlling mode:
A-01(volume delayed) and A-02 (volume timely). It could be
exchanged by adjusting the parameter.
7) It could set up maximal interval regeneration days. Even through
the capacity doesn't reach at the set value, but it exceeds the
maximal interval regeneration days (0~40 days), then I will start
8) It could set up interval backwash times which means service
several times, but backwash one time that is depending on local
1) Control Mode: Automatic/Volume Type/Up-flow Reg.
2) Suited Pressure: 0.15~0.6MPa
3) Suited Water Temperature: 5--45degree Celsius
4) Transformer Input: 100-240V/50-60Hz
5) Maximal Water Treatment Capacity: 4.5 m3/h
6) Tank Diameter for matching: 6"- 18"
7) Water Inlet/Outlet: 1"M (Male Thread)
8) Drain Outlet: 1/2"M (Male Thread)
9) Brine Line Connector: 3/8"M (Male Thread)
10) Riser Pipe: 1.05" OD (26.7mm)
11) Base (Tank thread): 2-1/2" 8NPSM
Range of Application:
Household purification, softening system
Boiler softening water system
RO pre-treatment system
Swimming pool filters equipment
Ion exchange equipment
Packing: 4SETS / CTN Carton Dimension: 800*550*240(MM)&