Colorful Silicone Folded Bowl cup 400 Ton Vacuum Compression
Molding Machine For Kitchen
- Vacuum Capability: It is capable of being high degree of vacuum. A
standard vacuum method is used to make consistent high quality
- Mold Opening Design: A patent is granted for a new type rail mold
opening. The opening angle is up to 90 degrees. It is very
convenient for operation. Another feature of the new rail mold
opening is that there is no need to remove the base of the rail
mold opening while replacing molds. It promotes the work efficiency
- Mold Loading / Unloading Design: Incorporate a special design into
the mechanism of mold loading / unloading. It is durable, quiet.
speedy and stale.
- Hydraulic System Design: The system employs both high and low
pressure pumps and is able to close both presses simultaneously.
The system is quiet, reliable with minimum maintenance required.
- Alignment: Two speeds of mold calibration are provided for users to
choose form, fast and slow. It makes the calibration more safe and
Flow Of Machine Motions:
- Close the mold and load the mold
- After loading the mold, the main cylinder goes up to the
predetermined position. Lower the vacuum hood. Suck out the air
unit a state of vacuum is reached. The main cylinder goes up.
Increase the pressure to expel bubbles out.
- After bubbles are expelled completely, the state of vacuum exists
no more. Lift the vacuum mask and curing.
- Lower the main cylinder and unload the mold. Open the mold.
- Take out the final product and put new material in.
1. Every work station can be used independently with respectively
hydraulic and power motor.
2. Special design movement platen with consistent 3. clamping force
for better molded part quality.
3. High vacuuming/degassing speed.
4. Anti-collision Molding System prevent mold damage occurring from
5. Adaptable with different mold model.
6. Suitable for sealing parts(eg.O-rings, gaskets), automotive
parts, keypads, electronic rubber parts, etc.
- Free technology training: you can come for inspection and training
- Free Installation and debugging: Our engineers will teach you about
the installation and debugging for free.
- After-sales service:We will supply the free repairment on thilfs
machine for one year,but will suppli the maintenance lifetime.(the
service is only for natural damage)
- Online remote control for software problems, whatspp or wechat for
|Upper Platen Size||mm||510*510||600*600||680*680||800*800||950*950|
|Lower Platen Size||mm||550*560||650*600||700*800||850*850||1000*1000|
Distance of Thermo
|Distance of Tie bar||mm||640*310||745*310||785*380||940*450||1105*475|
|Die sinking type||2RT-3RT-4RT-Track|