Wholesale Marketplace
Home >

High Safety Rubber Cutting Equipment , Digital Rubber Slippers Cutting Machine

Categories Automatic Rubber Cutting Machine
Brand Name: Juchuan
Model Number: JC-800E
Certification: SGS CE
Place of Origin: China
MOQ: 1 set
Price: Negotiation
Supply Ability: 500 sets one year
Delivery Time: 45 days
Packaging Details: N/A
Control Type: PLC and HMI
Max Material Width: 765mm
Material Thickness: 1 - 15mm
Cutting Speed: 60 - 95 counts per minutes
Blade Steel: hign speed tool steel
Working Pressure: 0.4-0.8MPa
  • Product Details
  • Company Profile

High Safety Rubber Cutting Equipment , Digital Rubber Slippers Cutting Machine

800 ODM Digital Silicone Cutting Machine Price Precision With Taiwan Accessories


Function and characteristics:


  1. The operation is high safety. Before installing the transparent safety sash and safety induction switch, when the safety sill is turned up, the safety induction switch can't sense the induction bolt, and the whole machine is in an emergency stop state. The startup and withdrawal switch is invalid, and the accident of accidental hand cut off is avoided. The machine is working normally, when you press the stop switch, the turret to the highest point, electromagnetic clutch release drive reducer, disconnect the main motor, speed reducer and electromagnetic brake power to stop, rest at the highest point, to prevent the continue cutting.
  2. Automatic lubrication system, the main machine drive mechanism, all have oil pipe oil lubrication, prolong the service life of the machine.
  3. Humanized design - refueling pump external, convenient for customers to refueling, built-in oil box, to prevent oil overflow. High strength foot wheel and foot cup are installed at the bottom of the equipment to facilitate the customer to shift and locate the equipment.

Operation methods and precautions:

  1. After the machine comes to the factory, the customer should prepare the AC380V power supply, please be sure to connect the zero line and the ground wire.
  2. The power supply must be grounded. If the shutdown time is longer, the power supply should be closed so as to prevent the heating of the electronic control box and prevent the accident.
  3. When the cutting tool is operated, it is necessary to turn the front safety baffle up or close the power supply so as to avoid accidents.
  4. In order to prevent the adhesive from sticking to the upper and lower feeding rollers, the glue on the surface of the upper and lower roller must be cleaned regularly.
  5. Before the machine is released, the internal drive mechanism has butter. The external oil pump has filled the gear oil. The customer should check the oil level of the pump regularly, and fill the oil again when approaching the bottom line, and check whether the screws and gears of each part are loose or not, if any, then tighten it.
  6. The boot and the normal cutting, such as touch screen display screen completely, according to the motor start button, then press the start button cutting (start), if you want to stop, first press the stop button after the stop button according to the motor, must not directly press the stop button to prevent motor, startup current for the moment large thermal overload relay disconnect control circuit, causing the device is not working properly.
  7. Please do not use sharp hard object to strike the man-machine interface, so as not to damage, the abnormal parts of the damaged operation are all responsible for the customer.

Technical Parameter:

  1. Rubber sheet width less than 560mm, the cutting length of 2 ~ 9999mm (upper limit can be adjusted according to customer requirements), the thickness is less than 10mm (rubber);
  2. The cutting speed of the cutter is 90 knives / minutes, and the width of the cutting strip can be cut by three sections.
  3. Power supply: AC380V, 50HZ, main motor power 2.2KW;
  4. The outer size: long x wide x high 1360mm x 1000mm x 960mm;
  5. Weight: mass 450KG

Main Technical Parameters:

Control SytemPLC or HMI
Max Material Width765mm
Blade MaterialHigh Speed Tool Steel
Material Thickness1-12mm
Cutting Speed60-95counts per minutes
Working Air Pressure0.4-0.8MPa
Voltage380V
Total Power2800W
Dimension1450x1200x1250mm
Gross Weight600kg

Other Mode of Cutting Machine:

Mode No.60080010001200
Control SytemPLC or HMIPLC or HMIPLC or HMIPLC or HMI
Max Material Width565mm765mm1065mm1165mm
Blade MaterialHigh Speed Tool SteelHigh Speed Tool SteelHigh Speed Tool SteelHigh Speed Tool Steel
Material Thickness1-12mm1-12mm1-12mm1-12mm
Cutting Speed60-95counts per minutes60-95counts per minutes60-95counts per minutes60-95counts per minutes
Working Air Pressure0.4-0.8MPa0.4-0.8MPa0.4-0.8MPa0.4-0.8MPa
Voltage380V380V380V380V
Total Power2800W2800W3700W3700W
Dimension1450x1000x1250mm1450x1200x1250mm1450x1400x1250mm1450x1600x1250mm
Gross Weight450kg600kg750kg950kg

Reference Images:



Quality High Safety Rubber Cutting Equipment , Digital Rubber Slippers Cutting Machine for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Guangzhou Ju Chuan Machinery Co., Ltd.
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0