Multifunction 4mm putty mortar spraying machine voltage customized
This machine is a kind of screw type with high pressure mortar
spraying machine, advanced technology,
operation and simple maintenance, no special training, can be
proficient in operation. This machine is
mainly used for building internal and external wall, cement mortar
spraying and the outer wall insulation
mortar spraying, refractory coating. Artificial rivers and launch
the white wall machine, main drawback is
that the density of cement mortar and the wall and mortar is low,
we introduced the spraying equipment
of large flow, high pressure, customer service for the above
defects, slurry density is much higher than
the standards prescribed by the state, avoids because of quality,
time limit for a project, wages and other
issues caused by the trouble. Multi-usage, can spray mortar,
waterproof coating, refractory material, is
not subject to regional and environmental conditions and the
influence of the coating surface shape.
1.Construction grouting: high pressure grouting for reservoir,
hydropower station, dam, port, whart;
reinforcement grouting for soft foundation; backfill grouting or
rock bolting for tunnel, subway, mining well
2.Slurry circulation or mortar backfill in deep mine construction
of ground source heat pump.
3.Mortar delivery for weight bridge, masonry and plastering.
4.Mortar delivery and plastering of commercial mortar or other
mortar with perfect performance.
1. Adaptive spraying material: Putty powder, paint, latex paint,
real stone paint, cement mortar, dry
powder mortar, insulation mortar, waterproof material, fireproof
materials, insulation materials, sound
absorbing materials and other water-soluble materials.
2. Adjust the flow, bring up the best painting effect.
3. Besides you can switch on the electric cabinet, also equipped
with remote control switch spraying.
4. Spray gun and feeding tube connections can rotate and easy
5. Construction of high efficiency and good quality.
6. Small size, convenient for on-site handling, and low cost of
accessories, maintenance is simple.
7. Easy to use, high speed, province materials, artificial and
cheaper, one machine with three people,
only 150 square/hour (thickness 2 cm).
8. The material ratio (cement) 0.7:3 mortar
Matters need attention:
1. When the sprayer connection must be connected to the ground wire
connection, after connect wire must be Bandage firmly by insulating
2. Be sure to lock the wheels at work.
3. Wash the body, carefully not into the motor.
4. Be sure to check whether there is the right amount of oil inside
the air compressor.
5. After use must clean the hopper, rush clean both inside and
6. When mixing, hands are forbidden to insert inside the hopper.
7. Air compressor and the motor rotates, do not touch.