Wholesale Marketplace
Home >

UE Union Elbow Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin

Categories Pneumatic Air Fittings
Brand Name: NBSANMINSE
Model Number: UE
Certification: ISO9001
Place of Origin: CHINA
MOQ: 1 PC
Price: Negotiation
Payment Terms: L/C, T/T, Western Union
Supply Ability: Negotiation
Delivery Time: Negotiation
Packaging Details: Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice
Type: Union Elbow
Standard or Nonstandard: Standard
Material: Stainless Steel 316L
Pressure: 3000 Psi
  • Product Details
  • Company Profile

UE Union Elbow Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin

UE Union Elbow Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin


Installation Instructions
Fittings are supplied assembled and finger tight . Disassembly before use can allow the entry of dirt or other particles
1 . Insert the tubing into the fitting
Check That the tube rests firmly on the fitting shoulder and that the nut is finger tight , At this point it is recommended that a scribe mark be drawn on the hex of the extending onto the fitting body . This mark will serve as an indicator for the starting point and proper pull – up .
2 Tighten the nut
1-1/4 Turns of the nut are required for 1/4” (6mm) and higher ( See Fig . A )
3/4 Turn of the nut is required for 3/16” (4mm) and lower ( See Fig.B )
Reassembly Instruction
Connections may be disconnected and remade repeatedly , without loss of leak tight seal .
1. Before disconnecting , Mark the position of the nut inrelation to the fitting body .
2. To reassemble , use a wrench to tighten nut to original position .
3. Tighten slightly with wrench until a slight rise in torque is felt .
Tube cutting
Two different methods can be used to cut tubes :
1 . Tube Cuter
2 . Hacksaw
Warning
Do not hold the tube in a vise in the place where it will be inserted into the fitting ( the vise will leave a mark on the tube that may cause leaks , and might cause ovality ).
Tube Handling
Scratches on the tube might cause leaks . it is , therefore , important to handle the tube carefully to reduce the risk of leaks .
Inspection Tubing
Use : This is a “ No- Go ” Gauge and should be used as follows :
Make up to fitting according to the following instructions : 1/4 inch ( 6mm ) , 3/8 inch , 1/2 inch ( 12mm ) – make up 1-1/4 turns from finger tight . Check gap between nut and body , using the appropriate sized gauge . If the gauge slides easily into the gap , tighten the nut further until gauge can not enter the gap
High Safety
In applications where severe conditions and high pressure exist , we recommend the following installation procedures :
1. Check that the nut is finger tight
2. Insert the tube ( Up to the shoulder )
3. Rotate the nut with a wrench until the tube does not rotate freely .
4. Mark position of the nut .
5. Rotate the nut 1-1/4 turns .
This method ensures that even if the tube O.D. is at the minimum tolerance , the ferrules will be in contact with the tube for the full 1-1/4 rotation.
In order to assure maximum fitting reliability and performance , great care should be given when selecting the tubing for each application
Tube Selection
Four variables must be considered when ordering tube for use with fittings :
1. Material
2. Tube wall thickness
3. Tube surface finish
4. Tube hardness
Tubing should comply with standard ASTM A213 or ASTM A269 , be seamless , and fully annealed .
The tube must be red of scratches and suitable for bending and flaring .

FAQ


Q: what types of products you can make ?
A: We can make many kinds of stainless steel materials and brass,aluminum . Valve / solenoid valve / electric valve / pneumatic valve and air cylinder products and so on .


Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .


Q: What ' s your delivery date ?
A: It depends on the number of orders . Delivery date is 7 - 30 days .if small order,pls buy from our aliexpress shop, If you need emergency products , we can speed up the production of the first arrangement .


Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .


Q: Can the product be made with our logo and brand ?
A: Yes , of course , we can make . we are OEM supplier for years and professional to make . But you need give us the authorization for work.


Why choose us


1: Sample order & small quantity order is acceptable .

2: Reliable quality assured and active after-sell service
3: One year quality guarantee

4: Large stock for fast shipping .
5: Customize according to your special request .



Fittings hose , Male female brass fitting , Male female fitting , Pipe fitting , Pipe fittings plastic , Plastic fitting , Pneumatic fitting , Push fittings , Quick connect fitting , Quick connecting , Quick coupling fittings , SS304 , Stainless steel fittings , Stainless steel pipe fittings , Tee tube fittings , Threaded stainless steel fittings , Tube connector , Tube fitting , Pipe Connection , Pipe Joint , Plasitc Quick , Couplers , Pneumatic parts , Threaded Union , Fitting pneumatic , Push in fitting , Push on fitting , Speed Controls , Stop fittings , Quick connecting tube fitting , Speed Controls , Check Valves , Hand Valves , Ball Valves , Hand Sliding fitting , Air control valve , Mini fitting , Push - In Fitting , Transition fitting , Push on fitting , Compression fitting , 316L Stainless steel fitting

Quality UE Union Elbow Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Ningbo Sanmin Import And Export Co.,Ltd.
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0