Wholesale Marketplace
Home >

ISO Certification Steel Wire Straightening And Cutting Machine Servo Shear Cut Mode

Categories Wire Straightening And Cutting Machine
Brand Name: meirun
Model Number: MR-06
Certification: ISO9001, CCC, CE
Place of Origin: China
MOQ: 1set
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 20 sets per month
Delivery Time: Delivery within 7 days of receipt of balance payment
Packaging Details: wooden case
Voltage:: 3 phase, 380V, 50Hz or customi
Pulling speed:: ~150m/min
Wire diameter:: 8-14mm
Warranty:: 12 months
Cut mode:: Servo Shear (flying shear)
Material:: steel bar or stainless steel bar
Price: Negotiable
  • Product Details
  • Company Profile

ISO Certification Steel Wire Straightening And Cutting Machine Servo Shear Cut Mode

New Condition and ISO Certification Steel Wire Straightening and cutting machine

1.Installation and commissioning of straight wire machine:

The structure of this machine is made by rotating the high speed rotor and adjusting the straight wire Angle to achieve the effect of straightening. Then, the machine will be used to talk about the silk.Reach the required size, silk touch after positioning key push forward the runway into 5 mm, shred the punch pin shaft above the knife immediately cut, wire through vertical wire on the knife plate opening pressure bearing, wire will automatically fall to wire racks, if you want to change the length, mobile positioning keys.First place the body on a flat surface and install the body and runway bracket on the screws.Put the track rod is installed on the walk line wheels, with metric scale from start to size of the cutting tools, and then the positioning key fixed well, the motor switch can then be connected to the power supply (power, will meet brake that the three screws on the top of the line, and then slowly turn the adjustment by hand straight send silk to pressure wheel again after open the power supply) move switch handle, if diao wheel in the right direction of rotation to change motor into the terminal.All rotating parts should be added with oil and butter.Put the cover down before you start, check if the motor connector leaks.The body of the straightening machine should be connected to the ground.2-3 minutes, then thread the wire into the high speed rotor, and hold the wire in the cuticle, in the cross-cutting knife hole.Adjust the adjustment mode Angle of the high speed rotor to achieve the straight wire effect.

2.specifications for wire strainghtening and cutting machine:

Wire Diameter
Wire straightening and cutting machine
galvanized wire iron wire steel wire and so on
as your required
PVC wire
as your required
Rebar steel bar deformed
as your required

This kind of machine has four specifications, and the diameter is from 1.5 to 12mm

The length could adjust according to customers demand. It could straighten stainless steel wire, aluminum wire, cold-drawing wire, and steel wire with plastics. This machine has many advantages, such as neat cutting mouth,easy to operation,low noisy, less error and good functions.

Quality ISO Certification Steel Wire Straightening And Cutting Machine Servo Shear Cut Mode for sale
Send your message to this supplier
Enter your email please.
Characters Remaining: (0/3000)
Inquiry Cart 0