Automatic Construction Deformed Bar Mesh Welding Equipment 2.5m
1, This machine is controlled by the special computer, the welding
current and welding time in each welding transformer can be
individually adjusted. The machine operating interface is made up
with color touch screen and control buttons, easy to operate.
2, Host framework structure, stable performance, the welding
pressure is continuously adjustable, solid and perfect welding
3, Integrated deceleration electromagnetic brake motors for power,
inverter control, adjustable speed.
4, Modular design for the upper and lower electrodes, convenient to
adjust the mesh.
5, Weft-hopper obtains wires by motor driver devices, electric
magnetic increase feeding device auto-feeding the wefts into the
preparation area of disc device from the large hopper, and the weft
hopper is installed in the removable pull rid, convenient to adjust
6, The mesh pulling part driven by servo motor can be set a variety of weft space in the same mesh, pull the mesh continuously back
and forth to extend the size of mesh, and use pneumatic clamping
device to accurate weft spacing.
7, The warp feeding part driven by stepper motor can be fed the
warps which a whole mesh needs when welding, so that the machine is
very short interval of time.
1.Control system: Panasonic (Japan) PLC program, Weinview (Taiwan) touch screen.
2.Wire feeding system: pre-straightened&pre-cut; longitude wire-Panasonic (Japan)
servo motor sending; cross wire-hopper device with step motor.
3.Cooling system: water-cooling transformers and water-cooling welding electrodes.
4.Mesh pulling system: Panasonic (Japan) servo motor for pulling mesh.
5.Patent technology: Brake clutch motor connects the principal axis directly, working stable.
6.Machine material: thick steel plate and profile steel, high strength and toughness.
7.Welding electrodes: pure red copper, can be used 3-6 months.
|Wire diameter||3-8mm/5-12||Warp form||Pre-cut wire|
|Weft spacing||100-300mm||Weft form||Pre-cut wire|
|Warp spacing||100-300mm||Rated voltage||380V|
|Welding spots||24||Weight||≈ 8T|
Falling wire part
Pulling mesh part