Pneumatic Tracking Cutter Device C Purline Cold Roll Forming
1. Brief introduction of this C shape forming machine
Steel forming machine is to produce light steel main equipment, the
use of steel or steel cold-formed after forming, rolling production
models of a variety of specifications purlins finished.
The wall thickness of the product out of the apparatus can be made
very thin, but also greatly simplifies the production process,
improve production efficiency. Wall thickness can be produced
hot-rolled with the general method but difficult to produce a
uniform cross-sectional shape of the complex variety of profiles
and cold-formed steel of different materials.
2. General parameters of the C purline forming machine
|Suitable Material||Hot rolled strip steel, Q235 or equivalent|
|Material Thickness||1.5-3.0 mm|
|Dimension||About 7.5*1.7*1.2m(L*W*H) , as per the drawing|
|Working Space||About 20.0*2.7m(L*W)|
You can set the length according to your need.
It is controlled by PLC
which can ensure the accuracy of ±1mm.
Automatically stop and cutting when it comes to the set
3. Components of C purline forming machine line
|Roller Material||High grade 45# steel. Hard chrome plating, 0.05mm.|
|Main Frame||400# steel. More stable and no shaking.|
16mm. We use thicker plates to ensure stability
of our products.
|Forming Steps||11-16, according to the drawing.|
|Shaft Material||Φ70 mm, high grade 45# steel.|
Treating process: tempering- finish turning,
high rigidity, hard to deform.
|Cr12, hardness HRC60-62.|
|Treating process: heat treatment- plane abrasion- wire electrode
4. The frequently asked questions
Q1:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.
Q2:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two
ends of the shaft every month, replace the hydraulic oil every 1-2
Q3:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,
if the broken parts can't repair,we can free send the new parts
replace the broken parts to you except the solenoid valve,the
solenoid valve you must pay the express cost yourself.
5. The Pneumatic Tracking Cutter Device C Purline Cold Roll Forming
Production Line details and process flow