Wholesale Marketplace
Home >

10 - 20KA Double phase surge protection device for installation in distribution boards

Categories Surge Protector Device
Brand Name: Singi
Model Number: SPD
Certification: CE/CB/ISO9001/CCC
Place of Origin: China
MOQ: 500pcs
Price: Negotiation
Payment Terms: T/T,L/C,Western union
Supply Ability: 600000 pcs per month
Delivery Time: normally 15 days after deposit
Packaging Details: Standard neutral carton
Poles Number: 1P,2P,3P,4P
COLOR: RED,YELLOW,WHITE
Type: SURGE PROTECTIVE DEVICE
Place of Origin:: Zhejiang, China
Imax: 100KA
Function: lightning protection
  • Product Details
  • Company Profile

10 - 20KA Double phase surge protection device for installation in distribution boards

10 - 20KA Double phase surge protection device for installation in distribution boards


Product Description


Surge Protection for Solar Photovoltaic (PV) System
The OBV6 series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The OBV6-B+C40 series is available for the main operating voltages in photovoltaic: 1000 Vdc.
The use of OBV6-B+C40 series Surge Protection is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. The electrical diagram of the OBV6-B+C40 series is based on high energy MOVs equipped with specific thermal disconnectors and related failure indicators. The OBV6B+C40 series is made with plug-in modules to allow a fast and easy maintenance in case of failure (disconnection from the DC network).
emDC SURGE PROTECTIVE DEVICE
CodeFSP-D40
Pole2P3P
Voltage500VDC,600VDC800VDC,900VDC,1000VDC
In(8/20)us(KA)20KA
Imax(8/20)us(KA)40KA
StandardIEC/EN61643
TypeII
Characteristic CurveB,C,D
Working Temperature“-5°”to +40°
Protection DegreeIP20
Electrical lifeMore than 8000times
Mechanical lifeMore than 2000times
Dimension(W)X(H)X(D)36x90x6854x90x68
Installation35MM DIN RAIL
AccessoryRemote signal
Installation Altitude≤2000M

Installation instructions


1. You must cut off the power supply before installation, live line work is strictly prohibited.

2. In protecting front line fuse or automatic circuit breaker.

3. Protector for the parallel installation, Kevin connection is recommended (for Kevin wiring convenience, operates two terminals on the module, which is a straight up. Kevin v-like connection is a connection. A contact point and the two lines in parallel, one into, a calculated). Connector requires solid and reliable, and short, thick and straight.

4. Protector in use during the fault display window should periodically verify and view state when red fault display window or remote Terminal outputs alarm signals, the protector fails, should be repaired or replaced in a timely manner.

5. When installed according to the installation diagram shows the connection, where l (L1, L2, L3) for the line, n is neutral, PE ground wire, do not mistake. After the installation is complete, check that the protection unit is plug in place, close the automatic circuit breaker (fuse) switch, check the working status is normal.


Quality 10 - 20KA Double phase surge protection device for installation in distribution boards for sale
Send your message to this supplier
 
From:
Enter your email please.
To: ZHEJIANG SINGI ELECTRICAL LLC
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0